150/175mm, 150/200mm, 200/250mm Submersible
- High operating efficiency
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Extremely tough & hard wearing lubricated journal bearings are used
- Designed for wide voltage fluctuations
- Better efficiency and consistent performance
- Motor portion covered with corrosive resistance stainless steel (SS 304) shell
- Specially designed high performance thrust bearing(SS 420 with Graphite Carbon) to withstand high axial thrust load
- SS 410 impellers and hard chrome SS sleeves are used to increase the life of the pump
| SPECIFICATIONS |
150mm / 175mm |
| Power Range |
4.5 kW - 15 kW (6HP - 20HP) |
| Voltage Range |
Three phase 380 - 415V, 50Hz AC Supply |
| Maximum Total Head |
101 metre |
| Maximum Flow Rate |
31 lps (111.6 m3/h) |
| SPECIFICATIONS |
150mm / 200mmm |
| Power Range |
5.5 kW - 18.5 kW (7.5HP - 25HP) |
| Voltage Range |
Three phase 380 - 415V, 50Hz AC Supply |
| Maximum Total Head |
88 metre |
| Maximum Flow Rate |
33.33 lps (120 m³/h) |
| SPECIFICATIONS |
200mm / 250mm |
| Power Range |
30 kW - 75 kW (40HP - 100HP) |
| Voltage Range |
Three phase 380 - 415V, 50Hz AC Supply |
| Maximum Total Head |
162 metre |
| Maximum Flow Rate |
60 lps (216 m³/h) |
Material of Construction
| Part Name |
175mm Pump |
| Pump Shaft |
SS 410/ SS 431 |
| Impeller |
SS 410 |
| Diffuser Chamber |
Cast Iron |
| Upper and Lower Housing |
Cast iron |
| Shaft |
SS 410 & EN 9 with 304 |
| Part Name |
200mm Pump |
| Check Valve Seat |
SG iron |
| Impeller |
SS 410 |
| Diffuser Chamber |
Cast Iron |
| Upper and Lower Housing |
Cast iron |
| Shaft |
EN 8 with SS-410/431 sleeve at bush guide |
| Part Name |
250mm Pump |
| Check Valve Seat |
Nitrile Butyl Rubber / SG iron |
| Impeller |
LTB 2 & SS 410 |
| Diffuser Chamber |
Cast Iron |
| Upper and Lower Housing |
Cast iron |
| Coupling |
SS 410/SS 431 |
Call Now ! +91 98082-00000